Amer Networks WS6028 Web GUI - Manual (Page 79)

Basic Management Configuration Chapter 18 Monitor
18-12
18.2.2.7 Distributed Tunneling Status
Distributed tunneling status includes clients using AP as home, multicast replication,
clients using AP as associate, VLAN with max multicast replication and distributed tunnels
(including Home AP terminal and Association AP terminal).
18.2.3 Failure AP List
The failure AP list is used to show the failed authentication AP details. If the AC is the
cluster controller, the failed authentication AP information of other AC in the cluster will
also be shown. To distinguish, there is a “*” before the failed authentication of an AP.
Click “delete all” button to delete all failed APs from the list.
Select the failure AP list and click “managed” button. There will be a pop up box, click
“OK” and this AP will be configured as the effective managed AP with the default profile;
and it will be managed the next time the ac discovers it. .
18.3 Wireless Client
Click monitor->Wireless Client to configure the associated and detected clients’
information.
18.3.1 Associated Client List
The associated client list shows the information of the associated clients including:
MAC address: Show the client’s MAC address (MAC address shown with a *