Amer Networks WS6028 Web GUI - Manual (Page 30)

Basic Management Configuration Chapter 6 AP Management
6-1
Chapter 6 AP Management
AP group is used to manage all connected AP. Multiple APs can be added into one
AP group for easer management. Click WLAN configuration->AP management to enter
into the AP management page.
6.1 Add/Modify/Delete AP Group
The “new”, “modify” and “delete” buttons can modify the existing AP groups.
Example:
1. Click “new” button and input the ID of 2, and then click “OK” to complete the creation.
2. Click “modify” on the right of AP group 2 to modify it.
3. Select the AP group 2 and click “delete” button to delete this AP group (the AP group 1
cannot be deleted).
6.1.1 Normal Attribute
Click “new” or “modify” to open the attribute page of the existing AP group.
Example: input the ID as 2, input the group name as group2; select the hardware
type as 17, select the load balance to disable. And then click “OK” button to complete the
configuration.