Amer Networks WS6028 Web GUI - Manual (Page 94)

Basic Management Configuration Chapter 19 Management
19-8
Operation—configuration or default
Example: input the Engine id as 18c30125fa and select the operation as
configuration. Click “apply” to complete the engine ID of 31386333303132356661 as
below:
19.2.2 SNMP Management
Click management->SNMP configuration->SNMP management to configure the
SNMP Agent state, RMON state, Trap state and SecurityIP state.
Example: select the SNMP agent state as open; select the RMON state as open;
select the Trap state as open and select the securityIP state as close. Click “apply” to
complete the configuration as below:
SNMP Agent state—open/close the SNMP agent function of the switch.
RMON state—open/close the RMON function of the switch.
Trap state—open/close the function that the device receives the Trap information.
SecurityIP state—open/close the security IP address checking function of the NMS
management station.
19.2.3 Community Managers
Click management->SNMP configuration->community managers to configure the
community string and TRAP manager.
1. Community managers—configure the community string and access priority.
Community string (1 to 255 characters)—configures the community string.
Access priority—includes “read only” and “read and write”.
Example: configure the community string as public; select the access priority as “read