3 f3 new job, New job, Using the function – ARAG Bravo 400S Seletron User Manual
Page 78
78
IF AT THIS STAGE YOU CHOOSE TO CONTINUE
WITHOUT SAVING (
2A
), ALL CURRENT JOB DATA WILL
BE LOST.
2B The
ESC
key stops the beginning of a new job.
3B Save the previous job with the function
Save job
(par. 14.2).
Now start from point
1 to begin a new spraying and pass directly to step 2A.
3B
Fig. 259
2A The
OK
key allows switching to the treatment start page without saving the job.
Fig. 260
Check the
Spraying settings
in Fig. 260;
change them if necessary.
14.3
F3
New job
Start a new spraying
1 Press
F3
to start a new spraying. If the current job has not been saved yet, Bravo 400S will prompt the user to save it
Press
OK
to continue without saving (
2A) or
ESC
to interrupt the procedure and save (
2B).
2b
2a
1
Fig. 258
"HOME" MENU - F3 NEW JOB
CONTINUES
Par.
Exit the function or
data change
Confirm access
or data change
Scroll
(LEFT / RIGHT)
Delete
selected
character
Increase /
decrease
value
Scroll
(UP / DOWN)
Enter
selected
character