ARAG BRAVO130 User Manual
Page 19
19
8.3.6
Liquid sprayed
Through this function, BRAVO 13X displays the total value of the liquid sprayed during the treatment,
but only if there is a flowmeter on the control unit.
QUICK RESET: from this menu position, you can directly reset the value of total
liquid sprayed by simultaneously pressing the
and
keys for at least 3
seconds.
Press the
key to confirm the resetting of the value.
8.3.4
Battery voltage
Through this function, BRAVO 13X displays the instantaneous voltage of the battery.
8.3.3
Flow rate
Through this function, BRAVO 13X displays the system's instantaneous flow rate during the treat-
ment, but only if there is a flowmeter on the control unit.
8.3.8 Distance
Through this function, BRAVO 13X displays the total distance traveled by the vehicle.
The value of distance traveled is only increased when the main valve is closed.
QUICK RESET: from this menu position, you can directly reset the distance trave-
led by simultaneously pressing the
and
keys for at least 3 seconds.
Press the
key to confirm the resetting of the value.
8.3.7
Tank level
Through this function, BRAVO 13X displays the total value of the quantity of liquid remaining during
the treatment, but only if there is a flowmeter on the control unit.
This function is not a level indicator, but the liquid remaining in the tank will be calculated by su-
btracting the liquid used from that set according to the programming described in point
8.3.6 - Liquid sprayed.
QUICK ACCESS: from this menu position, you can directly pass to the tank filling
function by simultaneously pressing the
and
keys for at least 3 seconds
For any questions, consult the section 8.2.1 - Tank filling.
8.3.5
Surface area
Through this function, BRAVO 13X displays the value for the total surface area treated.
QUICK RESET: from this menu position, you can directly reset the value of total
surface area treated by simultaneously pressing the
and
keys for at least
3 seconds.
Press the
key to confirm the resetting of the value.