ARM Electronics RDVR16A - Manual (Page 15)

BASIC OPERATION BASIC OPERATION
3.2 QUICK EVENT SEARCH 3.2 QUICK EVENT SEARCH
11
When finishing the setup of the motion detection, users could simply use the quick
event search to examine the setting. There is a simple example for you to understand
the principle.
4.1 RECORDING 4.1 RECORDING
The DVS offers three recording modes, manual record, event recording, and timer
record. If power is off accidentally, recorded video files will still be stored in the HDDs.
DVS will return to original recording status after power is on again.
q MANUAL RECORDING (continuous recording) :
Recording is initiated by manually pressing the REC button.
Indicated by the sign “ ● ”
q EVENT RECORDING (triggered by motion and external alarm) :
When this functions is activated,
the recording is triggered by motion or external alarm.
Indicated by the sign “ M ” and “ A ” .
q TIMER RECORDING (scheduled time) :
Recording is scheduled by Timer. Indicated by the sign “ TIMER RECORD ”.
For example, Motion detection
area: see as the following illustration
picture.Motion detection
factors: LS:10; SS:1; TS:3; RE:10
Alarm duration: 5 seconds.
Under
Recording NOTE :
When the HDDs are full under O/W
Recording mode, previous recorded
files may be overwritten without
further warning notices.
After recording for a period of time, users could use quick event search to playback
the motion trigger recording files, then users will see the
second hands second hands swing
between the number the number “ “ 12 12 ” ” and and “ “ 1 1 ” ” on the clock on the clock.