Garbled terminal display – H3C Technologies H3C S5800 Series Switches User Manual
Page 102
Advertising
92
•
The power supply is supplying power to the switch.
•
The console cable is correctly connected.
•
The console cable has no problem and the terminal settings are correct.
Garbled terminal display
If terminal display is garbled, check that the following settings are configured for the terminal, for
example, HyperTerminal:
•
Baud rate—9,600
•
Data bits—8
•
Parity—none
•
Stop bits—1
•
Flow control—none
•
Emulation—VT100
Advertising