Rack-mounting an s5800 switch except the s5800-54s, Rack-mounting, An s5800 switch – H3C Technologies H3C S5800 Series Switches User Manual
Page 53: Except the, S5800-54s
43
Rack-mounting an S5800 switch except the S5800-54S
This installation task requires two persons.
1.
Wear an ESD-preventive wrist strap and make sure it makes good skin contact and is well
grounded.
2.
Check that the mounting brackets have been securely attached to the switch. For more information,
see "
Attaching the mounting brackets to the switch chassis (for all S5800 switches except the
3.
Install the user-supplied cage nuts in the mounting holes in the rack posts.
4.
One person holds the switch chassis and aligns the mounting brackets with the mounting holes in
the rack posts, and the other person fixes the mounting brackets with anti-rust screws (user-supplied)
to the rack.
5.
Check that the switch chassis is horizontal and tighten the screws.