H3C Technologies H3C S5800 Series Switches - Manual (Page 29)

19
Figure 18 SFP+ cable
(1) Connector (2) Pull latch
LEDs
Table 9 LEDs at a glance
LED Availability
System status LED Entire series
Power module LED S5800-60C-PWR, S5800-32F
RPS status LED
Entire series (except the S5800-60C-PWR, S5800-54S, and
S5800-32F)
Port mode LED Entire series
Seven-segment LED Entire series
10/100/1000Base-T Ethernet port LED Entire series except the S5800-32F
100/1000Base-X SFP port LED S5800-60C-PWR, S5800-32F
SFP+ port LED Entire series except the S5800-60C-PWR
Management Ethernet port LEDs S5800-54S, S5800-32F
OAP card status LED S5800-60C-PWR
PoE module status LED S5800-60C-PWR
Interface card status LED
Entire series except the S5800-60C-PWR, S5800-54S, and
S5800-32F
System status LED
The system status LED shows the operating status of the switch.
Table 10 System status LED description
LED mark Status Description
SYS
Steady green The switch is operating correctly.
Flashing green (1 Hz) The switch is performing power-on self test (POST).
Steady red POST has failed.