H3C Technologies H3C S3100 Series Switches - Manual (Page 117)

Operation Manual – GVRP
H3C S3100-52P Ethernet Switch Chapter 1 GVRP Configuration
1-3
them by their destination MAC addresses and delivers them to different GARP
application (for example, GVRP) for further processing.
1.1.2 GVRP Packet Format
The GVRP packets are in the following format:
Figure 1-1
Format of GVRP packets
The following table describes the fields of a GVRP packet.
Table 1-1
Description of GVRP packet fields
Field Description Value
Protocol ID Protocol ID 1
Message
Each message consists of
two parts: Attribute Type and
Attribute List.
—
Attribute Type
Defined by the specific GARP
application
The attribute type of
GVRP is 0x01.
Attribute List It contains multiple attributes. —
Attribute
Each general attribute
consists of three parts:
Attribute Length, Attribute
Event, and Attribute Value.
Each LeaveAll attribute
consists of two parts: Attribute
Length and LeaveAll Event.
—
Attribute Length The length of the attribute 2 to 255