H3C Technologies H3C S3100 Series Switches - Manual (Page 437)

Operation Manual – Cluster
H3C S3100-52P Ethernet Switch Chapter 1 Cluster
1-14
1.3.2 Enabling NDP Globally and on Specific Ports
Table 1-13
Enable NDP globally and on specific ports
Operation Command Description
Enter system view
system-view
—
Enable NDP globally
ndp enable
Required
In system view
ndp enable interface
port-list
Enter
Ethernet
port
view
interface interface-type
interface-number
Enable
NDP on
specified
ports
In
Ethernet
port
view Enable
NDP on
the port
ndp enable
Required
You can choose to
enable NDP on some
ports in system view or
enable NDP on a port
in Ethernet port view.
1.3.3 Enabling NTDP Globally and on a Specific Port
Table 1-14
Enable NTDP globally and a specific port
Operation Command Description
Enter system view
system-view
—
Enable NTDP globally
ntdp enable
Required
Enter Ethernet port view
interface interface-type
interface-number
—
Enable NTDP on the port
ntdp enable
Required
1.3.4 Enabling the Cluster Function
Table 1-15
Enable the cluster function
Operation Command Description
Enter system view
system-view
—
Enable the cluster
function globally
cluster enable
Optional
By default, the cluster
function is enabled.
1.3.5 Accessing Shared FTP/TFTP Server from a Member Device
Perform the following operations in user view on a member device.