H3C Technologies H3C S3100 Series Switches - Manual (Page 406)

Operation Manual – QoS
H3C S3100-52P Ethernet Switch Chapter 1 QoS Configuration
1-13
1.7.2 Configuration Procedure
Table 1-10
Configure queue scheduling in system view
Operation Command Description
Enter system view
system-view
—
Configure the queue
scheduling mode
queue-scheduler
{ strict-priority | wrr
queue0-weight
queue1-weight
queue2-weight
queue3-weight
queue4-weight
queue5-weight
queue6-weight
queue7-weight
}
Required
In WRR mode, if the weight
value of one or more
queues is set to 0, SP
algorithm is used for this or
these queues
By default, all the outbound
queues on the port adopt
the WRR queue scheduling
algorithm and their default
weight values are
1:2:3:4:5:9:13:15.
Display the
queue-scheduling
mode and related
parameters on the
switch
display queue-scheduler
Optional
You can execute the
display
command in any
view.
Table 1-11
Configure queue scheduling in Ethernet port view
Operation Command Description
Enter system view system-view —
Enter Ethernet
port view
interface interface-type
interface-number
—
Configure the
queue scheduling
mode
queue-scheduler wrr
queue0-weight queue1-weight
queue2-weight queue3-weight
queue4-weight queue5-weight
queue6-weight queue7-weight
Required
In WRR mode, if the weight
value of one or more
queues is set to 0, SP
algorithm is used for this or
these queues
By default, all the outbound
queues on the port adopt
the WRR queue scheduling
algorithm and their default
weight values are
1:2:3:4:5:9:13:15.