H3C Technologies H3C S3100 Series Switches - Manual (Page 434)

Operation Manual – Cluster
H3C S3100-52P Ethernet Switch Chapter 1 Cluster
1-11
Operation Command Description
Configure the
cluster IP address
range
ip-pool
administrator-ip-address
{ ip-mask | ip-mask-length }
Required
Start automatic
cluster building
auto-build
[ recover ]
Required
Follow prompts to build a
cluster.
1.2.8 Configuring Interaction for the Cluster
Table 1-10
Configure interaction for the cluster
Operation Command Description
Enter system view system-view —
Enter cluster view
cluster
Required
Configure a shared
FTP server for the
cluster
ftp-server ip-address
Optional
By default, the management
device acts as the shared FTP
server.
Configure a shared
TFTP server for the
cluster
tftp-server ip-address
Optional
By default, no shared TFTP
server is configured.
Configure a shared
logging host for the
cluster
logging-host ip-address
Optional
By default, no shared logging
host is configured.
Configure a shared
SNMP host for the
cluster
snmp-host ip-address
Optional
By default, no shared SNMP
host is configured.
1.2.9 Configuring NM Interface for the Cluster
I. Configuration prerequisites
z
The cluster switches are properly connected;
z
The shared servers are properly connected to the management switch.