H3C Technologies H3C S3100 Series Switches - Manual (Page 563)

Operation Manual – Information Center
H3C S3100-52P Ethernet Switch Chapter 1 Information Center
1-12
Operation Command Description
Set the format of
time stamp
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
Optional
This is to set the time stamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.
Note:
To view debugging information of specific modules, you need to configure the
information type as debug in the info-center source command, and enable
debugging on corresponding modules with the debugging command as well.
1.2.6 Enabling Information Output to the Trap Buffer
Table 1-11 lists the related configurations on the switch.
Table 1-11
Enable information output to the trap buffer
Operation Command Description
Enter system view system-view —
Enable the
information center
info-center enable
Optional
By default, the
information center is
enabled.
Enable information
output to the trap
buffer
info-center trapbuffer
[channel
{ channel-number | channel-name }
| size buffersize]*
Optional
By default, the switch
uses information
channel 3 to output trap
information to the trap
buffer, which can holds
up to 256 items by
default.
Define an
information source
info
-center source { modu-name |
default
}
channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity
| state state } ]*
Required