H3C Technologies H3C S3100 Series Switches - Manual (Page 147)

Operation Manual – Link Aggregation
H3C S3100-52P Ethernet Switch Chapter 1 Link Aggregation Configuration
1-11
Table 1-3
Configure a dynamic LACP aggregation group
Operation Command Description
Enter system view
system-view
—
Configure a description
for an aggregation group
link-aggregation
group
agg-id description
agg-name
Optional
By default, an
aggregation group has no
description.
Configure the system
priority
lacp system
-priority
system-priority
Optional
By default, the system
priority is 32,768.
Enter Ethernet port view
interface interface-type
interface-number
—
Enable LACP on the port lacp enable
Required
By default, LACP is
disabled on a port.
Configure the port priority
lacp port
-priority
port-priority
Optional
By default, the port priority
is 32,768.
1.3 Displaying and Maintaining Link Aggregation
Configuration
After the above configuration, execute the display command in any view to display the
running status after the link aggregation configuration and verify your configuration.
Execute the reset command in user view to clear LACP statistics on ports.
Table 1-4
Display and maintain link aggregation configuration
Operation Command Description
Display summary
information of all
aggregation groups
display
link-aggregation
summary
Display detailed
information of a specific
aggregation group or all
aggregation groups
display
link-aggregation
verbose
[ agg-id ]
Display link aggregation
details of a specified port
or port range
display
link-aggregation
interface
interface-type
interface-number
[ to
interface-type
interface-number
]
Display local device ID
display lacp system-id
You can execute the
display
command in any
view.