H3C Technologies H3C S3100 Series Switches - Manual (Page 414)

Operation Manual – Mirroring
H3C S3100-52P Ethernet Switch Chapter 1 Mirroring Configuration
1-5
Table 1-3
Configure port mirroring in Ethernet port view (2)
Operation Command Description
Enter system view
system-view
—
Create a port mirroring
group
mirroring-group group-id
local
Required
Enter Ethernet port
view of the determined
destination port
interface interface-type
interface-number
—
Define the current port
as the destination port
mirroring-group group-id
monitor-port
Required
LACP and TCP must be
disabled on the destination
port
Exit current view
quit
—
Enter Ethernet port
view of the determined
source port
interface interface-type
interface-number
—
Define the current port
as the source port and
specify the direction of
the packets to be
mirrored
mirroring-group group-id
mirroring-port
{ both |
inbound
| outbound }
Required
Display the mirroring
parameter settings
display mirroring-group
{ all | local }
Required
This command can be
executed in any view.
III. Configuring port mirroring in system view
Table 1-4
Configure port mirroring in system view
Operation Command Description
Enter system view
system-view
—
Create a port mirroring
group
mirroring-group group-id
local
Required
Define the determined
destination port
mirroring-group group-id
monitor-port monitor-port
Required
LACP and TCP must be
disabled on the
destination port.
Define the determined
source port and
specify the direction of
the packets to be
mirrored
mirroring-group group-id
mirroring-port
mirroring-port-list
{ both |
inbound
| outbound }
Required