H3C Technologies H3C S3100 Series Switches - Manual (Page 21)

Operation Manual – CLI
H3C S3100-52P Ethernet Switch Chapter 1 CLI Configuration
1-4
z
Layer 2 ACL view
z
User-defined ACL view
z
QoS profile view
z
RADIUS scheme view
z
ISP domain view
z
HWPing view
z
HWTACACS view
z
MSDP view
z
PoE profile view
Table 1-4 lists operations you can perform in these CLI views and details about
commands used to enter these CLI views.
Table 1-4
Operations in CLI views
View
Available
operation
Prompt Enter method Quit method
User view
Display
operation
status and
statistical
information
<H3C>
Enter user view
once logging in
to the switch.
Execute the quit
command in user
view to log out of the
switch.
System
view
Configure
system
parameters
[H3C]
Execute the
system-view
command in
user view.
Execute the quit or
return
command to
return to user view.
[H3C-Ether
net1/0/1]
100M Ethernet
interface view
Execute the
interface
ethernet
1/0/1
command in
system view.
Ethernet
interface
view
Configure
Ethernet
interface
parameters
[H3C-Gigab
itEthernet1/
1/1]
Gigabit
Ethernet
interface view
Execute the
interface
gigabitetherne
t
1/1/1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
VLAN
view
Configure
VLAN
parameters
[H3C-vlan1]
Execute the
vlan
1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.