H3C Technologies H3C S3100 Series Switches - Manual (Page 578)

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Chapter 1 BootROM and Host Software
Loading
1-6
Figure 1-3
Connect and disconnect buttons
Note:
The new baud rate takes effect only after you disconnect and reconnect the
HyperTerminal program.
Step 6: Press <Enter> to start downloading the program. The system displays the
following information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
Step 7: Choose [Transfer/Send File] in the HyperTerminal’s window, and click
<Browse> in pop-up dialog box, as shown in Figure 1-4. Select the software you need
to download, and set the protocol to XMODEM.
Figure 1-4
Send file dialog box
Step 8: Click <Send>. The system displays the page, as shown in Figure 1-5.