H3C Technologies H3C S3100 Series Switches - Manual (Page 562)

Operation Manual – Information Center
H3C S3100-52P Ethernet Switch Chapter 1 Information Center
1-11
Table 1-9
Enable debugging/log/trap terminal display
Operation Command Description
Enable the
debugging/log/trap
information
terminal display
function
terminal monitor
Optional
By default, this function is enabled
for console user.
Enable debugging
information
terminal display
function
terminal debugging
Optional
By default, debugging information
terminal display is disabled for
terminal users.
Enable log
information
terminal display
function
terminal logging
Optional
By default, log information terminal
display is enabled for console
users.
Enable trap
information
terminal display
function
terminal trapping
Optional
By default, trap information terminal
display is enabled for terminal
users.
1.2.5 Enabling Information Output to the Log Buffer
Table 1-10 lists the related configurations on the switch.
Table 1-10
Enable information output to the log buffer
Operation Command Description
Enter system view system-view —
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the log
buffer
info-center logbuffer
[ channel { channel-number
| channel
-name } | size
buffersize
]*
Optional
By default, the switch uses
information channel 4 to
output log information to the
log buffer, which can holds up
to 512 items by default.
Define an
information source
info
-center source
{ modu-name | default }
channel
{ channel-number |
channel
-name } [ { log | trap
| debug } { level severity |
state
state } ]*
Required