H3C Technologies H3C SR8800 - Manual (Page 33)

23
• The slide rails (or rack shelves) can support the weight of the router chassis and its accessories.
• The rack can be correctly grounded.
• The rack has good ventilation system, and the porosity of the front and back doors is greater than
50%.
Installation tools
Accessories supplied by the router
Table 12 Accessories supplied by the router
Item Quantity Purpose
Console cable 1
Connecting the console port and the
configuration terminal for router login
Grounding cable 1 Grounding the router
Mounting brackets 1 pair Fixing the router to the rack
Cable management brackets 1 pair Cable management
M4*8 screw 1 set
• Fixing the mounting brackets to the router
• Fixing the cable management brackets to
the router
M6*12 screw 1 set
Fixing the router to the rack
M6 cage nut 1 set
ST2.9*9.5 self-tapping screw 1 set
Fixing the cable management brackets to the
mounting brackets (excluding the SR8808)
Air deflector
1 (supplied with the SR8808
only) Installed at the rear of the router to block air
from entering the chassis
ESD wrist strap 1 ESD-prevention
NOTE:
The number of screws and nuts supplied with the router depend on those shipped from the factory.
User-supplied tools and equipment
• Mechanical lift
• Cross-head screwdriver P1 – 100 mm, P2 – 150 mm, and P3 – 250 mm
• Flat-blade screwdriver P4 – 75 mm
• Marker
• Tape
• Diagonal pliers, wire-stripping pliers, and wire clippers
• Cables such as network cables and fiber cables
• Meters and equipment such as HUB and multimeter
• Configuration terminal