H3C Technologies H3C SR8800 - Manual (Page 98)

88
Model Description
Available transceiver modules
and cables
SPC-XP4LA
4-port 10GBASE-R/W optical Ethernet interface
card (XFP, LC)
• Ethernet XFP fiber module
• Ethernet and POS XFP fiber
module
SPC-GT48LA
48-port 10/100/1000BASE-T electrical
Ethernet interface card (RJ-45)
RJ-45 cable
SPC-GP24LA
24-port 1000BASE-X optical Ethernet interface
card (SFP, LC)
• FE SFP fiber module
• GE SFP fiber module
• GE CWDM SFP fiber module
• GE SFP copper module
• RJ-45 cable
SPC-GP48LA
48-port 1000BASE-X optical Ethernet interface
card (SFP, LC)
• FE SFP fiber module
• GE SFP fiber module
• GE CWDM SFP fiber module
• GE SFP copper module
SPC-XP16R
16-port 10GBASE-R optical Ethernet interface
card (SFP+, LC)
• 10GE SFP+ module
• 10GE SFP+ cable
NOTE:
The SPC-XP2LA, SPC-XP4LA, SPC-GT48LA, SPC-GP24LA, SPC-GP48LA, and SPC-XP16R are supported
by Release 3622 and later.
SPE base card specifications
Model Number of slots Description
SPE-1010 1 Single-line base card
SPE-1010-E 1 Single-line base card (enhanced)
SPE-1020 2 Dual-line base card
SPE-1020-E 2 Dual-line base card (enhanced)
SPE-1010-II 1 Next-generation single-line base card
SPE-1020-II 2 Next-generation dual-line base card
SPE-1010-E-II 1 Next-generation single-line base card (enhanced)
SPE-1020-E-II 2 Next-generation dual-line base card (enhanced)
MPE base card specifications
The MIC interface cards can be installed to or removed from the MPE base card when the router is
powered on. When you replace a MIC interface card, make sure that models of the new card and the
replaced card are the same.