H3C Technologies H3C SR8800 - Manual (Page 74)

64
Table 26 Command output
Field Description
transceiver diagnostic information
Fault detection information of the transceiver module plugged in the
interface.
Current diagnostic parameters Current fault detection parameters.
Temp.(°C) Digital diagnosis parameter-temperature, in °C, with the precision to 1°C.
Voltage(V) Fault detection parameter-voltage, in V, with the precision to 0.01 V.
Bias(mA)
Fault detection parameter-bias current, in mA, with the precision to 0.01
mA.
RX power(dBM)
Fault detection parameter-RX power, in dBM, with the precision to 0.01
dBM.
TX power(dBM)
Fault detection parameter-TX power, in dBM, with the precision to 0.01
dBM.