H3C Technologies H3C SR8800 - Manual (Page 49)

39
Figure 35 Installing a subcard
Connecting power cords
Prerequisites
Check the following items before connecting power cords:
• For lightning protection, the AC power should be led through an external lightning device into the
SR8800 router. For more information, see "Appendix C Lightning protection."
• The power switch is in the OFF position.
Connecting an AC power cord
Connecting an NEPS800-A or NEPS2000-A AC power cord
CAUTION:
The NEPS800-A and NEPS2000-A AC power receptacles must be compliant with IEC standards.