H3C Technologies H3C SecPath F1000-E - Manual (Page 82)

74
Table 33 Configuration items
Item Description
Name Specify the name for the FTP filtering policy.
Command Filtering
Select the filtering entries to be used for command
word filtering.
Available filtering entries are the configured FTP
keyword filtering entries. IMPORTANT:
• Packets that match
these filtering
conditions will be
dropped.
• You must configure at
least one of these items.
Upload Filename
Filtering
Select the filtering entries to be used for upload
filename filtering.
Available filtering entries are the configured FTP
keyword filtering entries.
Download Filename
Filtering
Select the filtering entries to be used for download
filename filtering.
Available filtering entries are the configured FTP
keyword filtering entries.
Enable Logging
Specify whether to log packet matching events.
IMPORTANT:
The logging function takes effect only when it is enabled in both the content filtering
policy and the interzone policy.
Configuring a Telnet filtering policy
Select Identification > Content Filtering > Filtering Policy from the navigation tree, and then click the
Telnet Policy tab to enter the Telnet filtering policy list page, as shown in Figure 75 . Then, click Add to
enter the page for adding a Telnet filtering policy, as shown in Figure 76 .
Figure 75 Telnet filtering policy list