H3C Technologies H3C SecPath F1000-E User Manual
Page 93
Advertising
85
Figure 89 Configuring a Telnet filtering policy
{
Enter the policy name telnet_policy.
{
Click the expansion button before Command Filtering.
{
Select command filtering entry reboot_telnet in the available filtering entry list, and then click <<
to add it to the selected filtering entry list.
{
Click Apply.
4.
Configure content filtering policy templates:
# Configure a content filtering policy template without Java applet blocking.
{
Select Identification > Content Filtering > Policy Template from the navigation tree, and then
click Add to perform the configurations shown in
.
Figure 90 Configuring a content filtering policy template without Java applet blocking
{
Enter the template name template1.
Advertising
This manual is related to the following products: