H3C Technologies H3C SecPath F1000-E - Manual (Page 95)

87
Figure 92 Configuring the interzone policy referencing the template without Java applet blocking
{
Select Trust as the source zone.
{
Select Untrust as the destination zone.
{
Select any_address as the source IP address.
{
In the Destination IP Address area, select the New IP Address option and then enter destination
IP address 5.5.5.5/0.0.0.0.
{
Select any_service as the service name.
{
Select Permit as the filter action.
{
Select the Enable the rule box to enable the rule.
{
Select the Continue to add next rule box to add another rule after finishing this one.
{
Select content filtering policy template template1.
{
Click Apply.
# Configure an interzone policy for traffic from security zone Trust to security zone Untrust,
referencing the content filtering policy template with Java applet blocking.
{
Select Trust as the source zone and Untrust as the destination zone, and configure the
configurations shown in
Figure 93 .