H3C Technologies H3C Intelligent Management Center - Manual (Page 109)

100
Figure 7 CPE Asset Report
CPE Asset Report fields:
• CPE Name—CPE name.
• IP Address—CPE IP address.
• Vendor—CPE vendor.
• OUI—Organizationally Unique Identifier of the CPE vendor.
• Serial ID—CPE serial ID.
• Hardware Version—CPE hardware version.
• Software Version—CPE software version.
CPE Connectivity Count Report
A CPE connectivity count report collects CPE connectivity count statistics of the specified CPEs in the
specified time range.
To view a CPE connectivity count report, configure the following parameters:
• Parameter "Begin Time" and "End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or select
Custom Range, and then specify the start time and end time manually.
• CPE Group—Select a statistics collection range, a CPE group or ALL CPEs, from the list.
• Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the Begin Time/End Time box and then select the begin time/end time in the calendar that
appears.
Figure 8 shows a CPE connectivity count report.