Quickly adding cpes, Modifying a cpe, Deleting one or more cpes – H3C Technologies H3C Intelligent Management Center User Manual
Page 20: Managing cpe details, Viewing cpe details
11
Quickly adding CPEs
1.
Click Service > BIMS > Resource Management > Add CPE.
2.
On the Add CPE page, click Quickly Add CPE.
3.
On the Quickly Add CPE page, specify the following settings:
{
Serial ID—Enter the serial ID of the CPE, or use a scan gun to scan the CPE serial ID. For the scan
gun to read the serial ID, place the cursor in the Serial ID field.
{
OUI—Enter the organizationally unique identifier of the vendor. The OUI should be six
hexadecimal characters.
{
CPE Name—Enter the CPE name, or accept the default, which is set to.
{
CPE Model—Select a CPE model from the CPE Model list.
{
CPE Group—Specify a CPE Group. By default, no CPE group is specified.
4.
Click OK.
After the CPE is added, the system retains all settings on the page except the serial ID and CPE
name. You can add additional CPEs without specifying the OUI, CPE class, or CPE group.
5.
Click Cancel to quit the adding procedure.
Modifying a CPE
1.
Click Service > BIMS > Resource Management > All CPEs.
2.
On the All CPEs page, select the target CPE from the CPE list, and then click the CPE name.
3.
On right side of the CPE Details page, click Modify CPE Name in the Apply pane to modify the CPE
name.
NOTE:
The modify function is only available for virtual CPE devices.
Deleting one or more CPEs
1.
Click Service > BIMS > Resource Management > All CPEs.
2.
On the All CPEs page, select one or more target CPEs in the list by selecting their check boxes.
3.
Click Delete.
Managing CPE details
Use the CPE details page to manage comprehensive CPE configuration items. Links to this page appear
in the Basic Information and Additional Information panes. You can check the alarm status from the
statistics chart in the CPE Details and the Recent 10 unrecovered alarms panes. You can also perform
management tasks in the Action, Apply, and Configuration Management panes.
Viewing CPE details
1.
Click Service > BIMS > Resource Management > All CPEs.
2.
On the All CPEs page, click the target CPE name in the CPE List.