H3C Technologies H3C Intelligent Management Center - Manual (Page 64)

55
2. Select the check boxes of the CPEs you want to deploy, and then click Deploy Configuration.
The Deploy Configuration page appears.
3. Select the folder that contains the configuration template you want to deploy, and then select the
target configuration template.
4. Configure the deployment strategies, parameters of the configuration template, and the task
attributes. For more information, see "
Deploying CPE configurations ."
NOTE:
You can only create one-off deployment tasks from the Configuration Center.
5. The selected CPEs are displayed in the CPE-to-Deploy list. View the Check result of each CPE you
want to deploy, and click the Delete icon to remove all the CPEs that cannot pass the check.
Also, you can click Select CPE and add more CPEs to the CPE-to-Deploy list.
6. Click OK to create the deployment task.
7. When creating the task successfully, the Result page provides the following functional links:
{
Task Details—Click the link to view the task details. For more information, see " Viewing
deployment task details ."
{
Clone to Add—Click the link to create a new task by copying and modifying this task. For more
information, see "
Copying a deployment task ."
{
Add Deployment Task—Click the link to create a new task by using the default parameters. For
more information, see "
Deploying CPE software ."
Backing up a CPE configuration
From the Configuration Center, you can designate a backup plan task to back up the configuration file
of the specified CPEs immediately.
To back up a CPE configuration:
1. Click Service > BIMS > Configuration Management > Configuration Center.
All CPEs that are managed by BIMS are displayed in the CPE configuration list.
2. From the CPE configuration list, select the check boxes of the CPEs for which you want to back up
configuration files, and then click Backup Configuration.
BIMS creates an auto backup plan task to back up the configuration file of the CPEs you specified
immediately. The task name is Task+current time.
After you manually back up the CPE configuration in the Configuration Center, the created auto backup
plan task appears in the Backup Task List of the Backup Configuration page, from where you can view
the task status and related information. For more information, see " Backing up CPE configurations ."
Restoring a CPE configuration to baseline
BIMS allows you to make a configuration file as baseline. With this function, you can restore the current
CPE configuration to baseline as needed. Basically, restoring a CPE configuration to baseline involves
creating a deployment task to deploy the baseline configuration file to the target CPE.
To restore CPE configuration to baseline:
1. Click Service > BIMS > Configuration Management > Configuration Center.