H3C Technologies H3C Intelligent Management Center - Manual (Page 99)

90
• Refresh the alarm notification rules
Managing mail notifications
The mail notification function enables the system to inform the operator of an alarm by e-mail.
Configuring the mail server
A mail server must be configured to enable the system to send alarm notifications by email.
NOTE:
The mail authentication configuration of the system must be consistent with that of the server. If you have
enabled authentication on the server for sending an email, you must also enable it on the mail server in the
system. If not, you will not have authentication options on the mail server.
To configure the mail server:
1. Click Alarm > CPE Alarm > Alarm Notification.
2. On the Alarm Notification page, click Configure Mail Server in the upper right corner of the page.
3. On the Configure Mail Server page, enter the Server Address.
4. Select whether to require a security connection (SSL).
5. Select whether to enable authentication. If yes, enter the Username and Password of the sender's
mailbox.
6. Enter the sender's email address.
7. Click Test Mailbox to test whether or not you can connect to the mail server. If you cannot connect,
confirm that the configuration settings you entered are correct, and modify as needed until you can
connect.
8. Click OK.
Adding or modifying a mail notification rule
On the Alarm Notification page, you can add one or more new notification rules or modify existing
ones.
NOTE:
The mail alarm notification only takes effect after the mail server is properly configured.
To add or modify a mail notification rule:
1. Click Alarm > CPE Alarm > Alarm Notification.
2. In the Mail Notification pane on the Alarm Notification page, do one of the following:
{
To add a new rule, click Add to open the Add Mail Notification page, and then proceed with
step 3.
{
To modify a rule, click its Modify icon to open the page for modifying the rule, and then
proceed with step 4.
3. Enter a Rule Name for the notification rule.
NOTE:
This step is mandatory for adding a mail notification rule. After you create a rule, you cannot modify its
name.