Acs running log, Syslog, Managing the option tool – H3C Technologies H3C Intelligent Management Center User Manual
Page 91
82
ACS Running Log
1.
Select the ACS Log Level as Fatal, Error, Warning, Info, or Debug, and then click OK.
2.
Select the Print ACS Packet status as Enabled (to output ACS packets to the ACS operations log) or
Disabled, and then click OK.
3.
Select the Print CPE Packet status as Enabled (to output CPE packets to the ACS operations log) or
Disabled, and then click OK.
Syslog
This function allows you to convert system operation logs to syslog and send it to the specified server.
To convert logs to syslog:
1.
Select Enable from the Change log to syslog list.
2.
Enter the destination IP address in the Destination IP Address field.
3.
Enter the destination port number in the Port field.
4.
Click OK.
To disable this function:
1.
Select Disable from the Change log to syslog list.
2.
Click OK.
Managing the option tool
Use this function to convert between DHCP Option 43 and an ACS URL.
The DHCP server and DHCP client exchange vendor specific information through Option 43. When a
CPE serves as the DHCP client, it can obtain the ACS parameter through Option 43.
To manage Option 43 using the Option Tool :
1.
Configure the Option 43 attribute on the DHCP server:
a.
Click Service > BIMS > System Configuration >Option Tool.
b.
On the Option Tool page, select Convert URL to Option 43 as the Conversion Type.
c.
Select H3C/HP Device or Windows as the DHCP Server Type.
d.
Enter the ACS URL content, including the ACS URL address, username, and password,
separated by spaces (or hexadecimal numbers 0x20). For example:
http://10.153.89.1:9090 bims imcbims.
e.
Click Convert.
Converted content appears in the DHCP Option 43 field on the Option Tool page.
f.
Record the content in the DHCP Option 43 field.
2.
Confirm the converted result:
a.
On the Option Tool page, select Convert Option 43 to URL as the Conversion Type.
b.
Select H3C/HP Device or Windows as the DHCP Server Type.
c.
Verify that the content in the DHCP Option 43 field matches the content from step 1. If this field
is blank, enter the content you recorded.
d.
Click Convert.
e.
Verify that the ACS URL content matches the content you entered in step 1.