Grass Valley K2 System Guide v.9.0 - Manual (Page 129)

Overview of Storage Utility
Controllers in
Device
Controller
Bound LUNs
LUN
Unbound Disks
Disks
Status area
(displays status of
the selected item)
The Storage Utility user interface includes a tree view in the left-hand pane, and a status information
area displayed in the right-hand pane. The tree view displays the hardware that makes up the storage
system connected. The context menus in the tree view are used to configure storage. The right-hand
status pane displays information about the item selected in the tree view. The tree view hierarchy
is as follows:
Controllers in Device — Provides a logical grouping of RAID Controllers by device.
Controller — Represents the RAID Controllers found. These are numbered in the order discovered.
The controller icon represents both RAID Controller A and, if installed, RAID Controller B. To
determine if an optional RAID Controller B is installed, select the Controller icon in the tree view,
then examine the status pane for peer status.
Bound LUNs — Expanding the Bound node displays all bound LUNs.
LUN — Represents a bound LUN. Expanding the LUN node displays the disk modules that make
up the LUN.
UnBound disks — Expanding the UnBound node, displays all unbound disk modules.
Disks — Represents the disk modules.
The Storage Utility detects disks available and lists them on the opening screen.
Refer to the following procedures to use Storage Utility for maintenance tasks
06 November 2012 K2 System Guide 129
Managing Stand-alone Storage