Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 217)

July 3, 2007 K2 Storage System Instruction Manual 217
Configuring the redundant server 1B
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3R K2 Media Server 1B is as
follows:
• SQL Server
• K2 Server
• File System Server
• File System Client
• SNMP Services
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Chapter 9, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .
Network Configuration
This page displays the
control network Ethernet
port, and allows you to
configure the FTP/
Streaming network Ethernet
port.
NOTE: This page
does not configure
the iSCSI interface
(media network)
ports.
For Level 3R, since this
server does not take the role
of FTP server, configuring
the second port here for the
FTP/streaming network is
not required.
The top port is the port over which the K2 System Configuration
application is communicating with the K2 Media Server. If correctly
configured, it is already assigned the control network IP address, as
displayed on this page.
Select the other port and click
Modify . A network configuration dialog
box opens. Enter the FTP/Streaming IP address and the subnet mask and
click
Apply .
Click Next .
On this page… Do this…