Accessing the diagnostics menu, Specifying element indexes, Stopping diagnostic tests – Grass Valley PLS200 User Manual
Page 107
Accessing the Diagnostics Menu
PLS200 Library Installation and Operation
85
Accessing the Diagnostics Menu
To access the Diagnostics Menu:
1. Change to LCD Interface control mode. See page 48.
2. From the Main Menu, press
to select Maintenance Menu and press
.
3. From the Maintenance Menu, press
to select Diagnostics Menu and press
. The library displays the Diagnostics Menu:
4. Refer to the appropriate section on the following pages to perform each test.
Specifying Element Indexes
Some of the tests require you to specify one or more element indexes. Refer to
Appendix C for diagrams showing the element indexes for the PLS200.
Stopping Diagnostic Tests
To stop a diagnostic test, press
, then
.
Enter
Enter
→
S e
l
f
T e s
t
P o s
i
t
i
o n
t
o
E l
e m
P a r
k
M o v e
C a r
t
r
i
d g e
↓
Escape
Enter