Grass Valley PLS200 - Manual (Page 23)

PLS200 Library Installation and Operation 1
Chapter
1
Installing the Hardware
This chapter describes how to install and set up the library hardware.
Preparing for Installation
Before installing the library, complete the preliminary steps listed in the table
below. Each step is described on the following pages.
Unpack the Library
Complete the unpacking steps printed on the box. Save the packing materials in
case you need to ship the library later.
✔ Step Description
1 Unpack the library.
2 Check the accessories.
3 Protect the library against ESD.
4 Obtain a fork lift or at least four people.
5 Verify your Profile software version.