Grass Valley PLS200 - Manual (Page 70)

Chapter 3 Operating the Library
48 PLS200 Library Installation and Operation
Changing the Control Mode
➤ Important When you change from SCSI Interface control mode to any
other mode, you cannot control CHM motion with Media Manager or other
similar software.
1. Make sure the library is in the ready state (that is, no hardware errors, door
closed, and no cartridge move operations occurring).
2. From the Main Menu, press to select Interface Menu.
3. From the Interface Menu, press to select Control Mode Menu and press
.
4. From the Control Mode Menu, press to select the control mode and press
. The current control mode is indicated with an asterisk (*). The
library changes from the current control mode and displays a screen similar
to the following:
5. Press to return to the Interface Menu, and again to return
to the Main Menu.
Enter
Enter
A C T I V E I N T E R F A C E :
F r
ο
m : S C S I
T o
:
L C D
S t a t u s : D O N E
Escape Escape