HEIDENHAIN ND 2100G - Manual (Page 226)

226 2 Installation and Specifications
2.4 F
o
rm
ulas
OnEvent function
The OnEvent function is used to assign values to dimensions or to
perform operations when triggered by a specified event. When the
triggering event occurs, the value is assigned to the dimension and
latched, or the specified operation is performed.
When the OnEvent function is inserted, a menu of triggering events is
displayed. Triggering events include a collection of system triggering
events provided by the menu, and one triggering event that is user-
defined. System triggering events cause OnEvent functions to
execute each and every time predetermined system events happen.
The user defined triggering event causes OnEvent functions to
execute each time a user defined event happens.
Triggering events:
OnEvent function.
DataEntr Occurs after a data record is entered into the
database.
DispOff Occurs after the display is turned off using the red
LCD ON/OFF button.
DispOn Occurs after the display is turned on using the red
LCD ON/OFF button.
Edge1 Occurs after an (Optional) external edge event has
happened on external edge line 1.
Edge2 Occurs after an (Optional) external edge event has
happened on external edge line 2.
Edge3 Occurs after an (Optional) external edge event has
happened on external edge line 3.
HxLx Occurs after the HwLx function has latched a new
value.
Key Occurs after the specified front panel key has been
pressed.
PartClr Occurs after the part database has been cleared.
PartLoad Occurs after a new part has been loaded.
PartUnld Occurs when a part is unloaded.
Playback Occurs after execution of the scan function, when
scanned results are played back.
PowerOn Occurs at startup.
Trig User defined triggering event.