HEIDENHAIN ND 2100G - Manual (Page 79)

ND 2100G GAGE-CHEK 79
2
.3
S
o
ft
wa
re
s
e
tu
p Copying dimension parameters to other parts
Dimensions assigned to one part can be copied to another to save
setup time when similar or identical measurements must be
performed on new parts.
To copy dimensions to a new part:
U Highlight the Part field
U Press the COPY TO soft key. The labels, formulas and all other
parameters will be copied to the next new part. Database records
will not be copied. A pop-up screen will show the next part number.
U Press the OK soft key to copy the labels
U Press the OK soft key to return to the Dimension setup screen
Deleting parts
Parts can be deleted when it is no longer necessary to store old
measurement results in the ND 2100G. Deleting old part data makes
more system memory available for new data and dimension formulas.
To delete a part:
U Highlight the Part field
U Press the INC or DEC soft key to select the desired part
U Press the DEL soft key
U Press the YES soft key to delete the part