HEIDENHAIN ND 2100G - Manual (Page 72)

72 2 Installation and Specifications
2
.3
S
o
ft
wa
re
s
e
tu
p Deleting data entries
Press the CANCEL key to erase the last (right-most) numeric digit or
alpha character in the selected data field.
Entering setup parameters
Setup parameters and functions are displayed above the soft keys
across the bottom of the screen.
Changing the channel or dimension number
Often setup parameters and functions are related to specific channels
or dimensions. When a channel or dimension is highlighted on the
setup screen, the channel or dimension number can be increased or
decreased by pressing the INC or DEC soft key or by pressing the
LEFT or RIGHT WIDE key.
Highlight a data field and press the CANCEL key to erase the right-most digit or
character.
1
3 4
2
Key Function
1 LEFT WIDE key Decreases the channel or dimension.
2 RIGHT WIDE key Increases the channel or dimension.
3 DEC soft key Decreases the channel or dimension.
4 INC soft key Increases the channel or dimension.