Select a part to begin a measurement, 5 oper ating instr u ctions – HEIDENHAIN ND 2100G User Manual
Page 42
42
1 Operation
1
.5 Oper
ating instr
u
ctions
Select a part to begin a measurement
The correct part (number) must be selected prior to conducting
measurements.
One hundred part configurations can be stored in the ND 2100G. Each
part configuration includes all the ND 2100G settings and dimension
formulas required to conduct measurements and report results for the
part.
To select a part:
U
Press the MENU... soft key
U
Press the EXTRA soft key
U
Use the arrow cursor keys to highlight Cycle or Part?
U
Press the ENTER key. If Part? was highlighted, you will be prompted
for a part number.
U
Use the numeric keypad to specify the part
U
Press the ENTER key
If Cycle was highlighted, the part number will be incremented.
Continue incrementing to select the desired part number.
Select Part
Establish a
Measurement
Reference
Conduct a
Measurement
Review
Measurement
Data
Report or Send
Results
Cycle highlighted.
Part? highlighted.