Entering parameters, 3 s o ft wa re s e tu p – HEIDENHAIN ND 2100G User Manual
Page 73
ND 2100G GAGE-CHEK
73
2
.3
S
o
ft
wa
re
s
e
tu
p
Entering parameters
When a setup parameter field (
1
) is highlighted, setup alternatives are
shown above the soft keys across the bottom of the screen (
2
). Press
the soft key under the desired setup alternative to enter the
parameter.
Parameters and options are shown here:
Copying parameters to other parts, dimensions or channels
A single highlighted parameter or all parameters of the current part,
dimension or channel can be copied to all others by pressing the
APPLY ALL soft key.
If all part, dimension or channel parameters are already the same for
the selected setup category, the APPLY ALL soft key will be grayed-
out.
1
2
1
Highlighted parameter field
2
Parameter alternatives
Copy all parameters by pressing the
APPLY ALL soft key when the part,
dimension or channel name is
highlighted.
Copy a single parameter by pressing the
APPLY ALL soft key when only a single
parameter is highlighted.