HEIDENHAIN CNC Pilot 4290 Pilot User Manual
Page 37
37
Linear slot on lateral surface G311-Geo
G311 defines a linear slot on the lateral surface.
Parameters
Z, C: Center point of slot (position, angle)
CY:
Angle as linear dimension
A:
Angle to longitudinal axis of slot (reference: Z-axis) – default: 0°
K:
Slot length
B:
Slot width
P:
Pocket depth – no entry: ”P” from G308
Circular groove on lateral surface G312-/G313-Geo
G312/G313 defines a circular slot on the lateral surface.
Parameters
Z, C: Center of curvature of slot (position, angle)
CY:
Angle as linear dimension
R:
Curvature radius (reference: center point path of the slot)
A:
Angle of slot starting point (reference: Z axis)
W:
Angle of slot end point (reference: Z axis)
B:
Slot width
P:
Pocket depth – no entry: ”P” from G308
Example: G312-Geo
Figur
es on the
lat
e
ra
l surf
ace