Manual operation and setup, Positioning with manual data input (mdi) – HEIDENHAIN iTNC 530 (340 422) ISO programming User Manual
Page 14
14
2.1 Switch-On, Switch-Off ..... 46
2.2 Moving the Machine Axes ..... 48
To traverse with the machine axis direction buttons: ..... 48
Traversing with the HR 410 electronic handwheel ..... 49
Incremental jog positioning ..... 50
2.3 Spindle Speed S, Feed Rate F and Miscellaneous Functions M ..... 51
Changing the spindle speed and feed rate ..... 51
2.4 Datum Setting (Without a 3-D Touch Probe) ..... 52
Datum management with the preset table ..... 54
2.5 Tilting the Working Plane (Software Option 1) ..... 59
Application, function ..... 59
Traversing the reference points in tilted axes ..... 60
Setting the datum in a tilted coordinate system ..... 61
Datum setting on machines with rotary tables ..... 61
Datum setting on machines with spindle-head changing systems ..... 61
Position display in a tilted system ..... 61
Limitations on working with the tilting function ..... 61
Activating manual tilting ..... 62
3.1 Programming and Executing Simple Machining Operations ..... 64
Positioning with Manual Data Input (MDI) ..... 64
Protecting and erasing programs in $MDI ..... 67