HEIDENHAIN iTNC 530 (340 422) ISO programming - Manual (Page 436)

436 10 Programming: Q Parameters
1
0
.8 E
n
te
ri
ng
F
o
rm
u
las D
ir
e
ctly
Programming example
Calculate an angle with the arc tangent from the opposite side (Q12)
and adjacent side (Q13); then store in Q25.
Call the Q parameter functions by pressing the Q key.
For formula input, press the FORMULA soft key.
Enter the parameter number.
Shift the soft-key row and select the arc tangent
function.
Shift the soft-key row and open the parentheses.
Enter Q parameter number 12.
Select division.
Enter Q parameter number 13.
Close parentheses and conclude formula entry.
Example NC block
PARAMETER NO. FOR RESULT?
N37 Q25 = ATAN (Q12/Q13)
25
12
13