HEIDENHAIN iTNC 530 (340 422) ISO programming - Manual (Page 547)

HEIDENHAIN iTNC 530 547
14.5 Spe
c
ifics Ab
ou
t Fi
le Manag
e
ment
14.5 Specifics About File
Management
The iTNC drive
When you call the iTNC file manager, the left window shows all
available drives. For example:
n
C:\ : Windows partition of the built-in hard disk
n
RS232:\ : Serial interface 1
n RS422:\ : Serial interface 2
n TNC:\ : Data partition of the iTNC
There might also be other networks available if you have connected
them with Windows Explorer.
If you connect a new network drive with Windows Explorer, you may
have to update the iTNC’s display of available drives:
U U U U To call the file manager, press the PGM MGT key.
U U U U Move the highlight to the drive window at left.
U U U U Switch to the second level of the soft-key row.
U U U U To update the drive overview, press the UPDATE TREE soft key.
Please note that the data drive of the iTNC appears in the
file manager with the name TNC:\. In Windows Explorer,
this drive (partition) appears with the letter D.
Subdirectories on the TNC drive (e.g. RECYCLER and System
Volume Identifier
) are created by Windows 2000 and
may not be deleted.
1
2