HEIDENHAIN iTNC 530 (340 422) ISO programming - Manual (Page 493)

HEIDENHAIN iTNC 530 493
12.8 Sho
w
ing th
e W
o
rk
piece in
the W
o
rk
in
g Space
Move workpiece blank upward
Move workpiece blank downward
Show workpiece blank referenced to the set datum
Show the entire traversing range referenced to the
displayed workpiece blank
Show the machine datum in the working space
Show a position determined by the machine tool
builder (e.g. tool change position) in the working
space
Show the workpiece datum in the working space
Enable (ON) or disable (OFF) working-space
monitoring
Function Soft key