HEIDENHAIN 530 (340 49x-07) - Manual (Page 44)

44
10.1 Entering Miscellaneous Functions M and STOP ..... 366
Fundamentals ..... 366
10.2 Miscellaneous Functions for Program Run Control, Spindle and Coolant ..... 367
Overview ..... 367
10.3 Miscellaneous Functions for Coordinate Data ..... 368
Programming machine-referenced coordinates: M91/M92 ..... 368
Activating the most recently entered datum: M104 ..... 370
Moving to positions in a non-tilted coordinate system with a tilted working plane: M130 ..... 370
10.4 Miscellaneous Functions for Contouring Behavior ..... 371
Smoothing corners: M90 ..... 371
Insert rounding arc between straight lines: M112 ..... 371
Do not include points when executing non-compensated line blocks: M124 ..... 372
Machining small contour steps: M97 ..... 373
Machining open contours corners: M98 ..... 375
Feed rate factor for plunging movements: M103 ..... 376
Feed rate in millimeters per spindle revolution: M136 ..... 377
Feed rate for circular arcs: M109/M110/M111 ..... 378
Calculating the radius-compensated path in advance (LOOK AHEAD): M120 ..... 379
Superimposing handwheel positioning during program run: M118 ..... 381
Retraction from the contour in the tool-axis direction: M140 ..... 382
Suppressing touch probe monitoring: M141 ..... 383
Delete modal program information: M142 ..... 384
Delete basic rotation: M143 ..... 384
Automatically retract tool from the contour at an NC stop: M148 ..... 385
Suppress limit switch message: M150 ..... 386
10.5 Miscellaneous Functions for Laser Cutting Machines ..... 387
Principle ..... 387
Output the programmed voltage directly: M200 ..... 387
Output voltage as a function of distance: M201 ..... 387
Output voltage as a function of speed: M202 ..... 388
Output voltage as a function of time (time-dependent ramp): M203 ..... 388
Output voltage as a function of time (time-dependent pulse): M204 ..... 388
10 Programming: Miscellaneous Functions ..... 365