HEIDENHAIN 530 (340 49x-07) - Manual (Page 466)

466 Programming: Multiple Axis Machining
12.1 F
unctions f
o
r Multiple Axis Mac
h
ining
12.1 Functions for Multiple Axis
Machining
The TNC functions for multiple axis machining are described in this
chapter.
TNC function Description Page
PLANE Define machining in the tilted working plane Page 467
PLANE /M128 Inclined-tool machining Page 489
FUNCTION TCPM Define the behavior of the TNC when positioning the rotary axes (improvement of
M128) Page 491
M116 Feed rate of rotary axes Page 496
M126 Shortest-path traverse of rotary axes Page 497
M94 Reduce display value of rotary axes Page 498
M114 Define the behavior of the TNC when positioning the rotary axes Page 499
M128 Define the behavior of the TNC when positioning the rotary axes Page 501
M134 Exact stop for positioning with rotary axes Page 504
M138 Selection of tilted axes Page 504
M144 Calculate machine kinematics Page 505
LN blocks Three-dimensional tool compensation Page 506
SPL blocks Spline interpolation Page 517