Yaskawa PG-X2G5 - Manual (Page 22)

5 Installation Procedure
22 YASKAWA ELECTRIC TOBP C730600 23C 1000-Series Option SI-P3/V, SI-P3/T Installation Manual
3.
Remove the bottom cover and connect the PROFIBUS-DP Option ground cable to
the ground terminal.
Figure 9
Figure 9 Connect Ground Cable
Note: The four different ground cables packaged with the PROFIBUS-DP Option connect to different
models. Select the proper ground cable from the PROFIBUS-DP Option kit depending on drive
size.
Figure 10
Figure 10 Ground Cable
Note: Cover removal for certain larger models with a Terminal Cover:
-Single-Phase 200 V Class: CIMR-V BA0006 to BA0018, CIMR-T BV0006 to BV0018
-Three-Phase 200 V Class: CIMR-V 2A0008 to 2A0069, CIMR-T 2V0008 to 2V0069
-Three-Phase 400 V Class: All models
Remove the terminal cover before removing the bottom cover to install the PROFIBUS-DP
Option. Replace the terminal cover after wiring the PROFIBUS-DP Option.
Figure 11
Figure 11 Models with Terminal Cover
A – Option unit connection: screw size = M3
B – Drive-side connection: screw size = M3.5 to M6
Ground terminal
Ground cable
Bottom cover
A
B