Yaskawa MPiec Controllers User Manual
Page 17
Advertising
Subject: Technical Manual
Product: MPiec Controllers
Doc#: TM.MPIEC.02
Title: Linear Flying Shear Application Solution Package for MPiec Controllers
17
Figure 12 illustrates the various elements that form the ControlData structure.
Figure 12: ControlData elements
3. Ensure that all slave axes are homed. The LinearFlyingShear function block assumes that the slave axes are
at their home positions when the function block is enabled. If the slave axes are not at their home positions,
the slave axes may run into mechanical limits depending on the stroke length of the designed cam.
4. Enable the LinearFlyingShear block.
Advertising